Module 5 - Fitting the Cooling Pipework

<19th February 2006>
Coolant pipes:

<21st February 2006>

<13th March 2006>

<22nd March 2006>

<26th March 2006>
Hose Tape:

Header Tank:

<28th March 2006>
Scuttle Pipe:

Header Tank:

<4th April 2006>

<9th April 2006>

Then next morning arrived to a number of puddles! So i took the nose cone off and fully tighted all the joints. In the process i managed to break the water temp sensor and now the body is stuck in the thermostat bellhousing. I will remove the housing and use a stud extractor to remove the body. On a plus side all the leaks have been fixed!