Module 5 - Fitting the Exhaust

<28th January 2006>
To get the exhaust in and through the body work creating the smallest possible outlet, Westfield provide the measurements in the diagram to the right.

I decided to be a bit more sure and so I bolted the exhaust to the engine before putting the body on and created the template below out of a split out cardboard box.
So once the bosy is in place i should be able to put the template up against it and mark out the exact dimensions of the hole needed. This can then be extended to fit as needed.

<11th February 2006>

<14th February 2006>

<19th February 2006>

<2nd March 2006>

<8th March 2006>

<13th March 2006>

<26th March 2006>

<1st April 2006>

<3rd April 2006>